User Tools

Site Tools


admin:settings:shelving-locations

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
admin:settings:shelving-locations [2019/03/28 19:40] – created tmccannaadmin:settings:shelving-locations [2022/08/05 20:03] (current) smorrison
Line 1: Line 1:
 ====== Shelving Locations ====== ====== Shelving Locations ======
  
-Shelving Locations (formerly known as Copy Locations) are used to identify where an item is located within a branch (for example, Reference or Stacks or AV) and also to set certain properties for all items within the shelving location (for example, holdability). They can be set at either the System or Branch level. System-level shelving locations will be available to all libraries in the system. Branch-level shelving locations are only available to the individual branch. The "PINES" copy locations are unavailable, as they are administered by PINES/GPLS staff. +Shelving Locations (formerly known as Copy Locations) are used to identify where an item is located within a branch (for example, Reference or Stacks or AV) and also to set certain properties for all items within the shelving location (for example, holdability). They can be set at either the System or Branch level. System-level shelving locations will be available to all libraries in the system. Branch-level shelving locations are only available to the individual branch. The "PINES" shelving locations are unavailable, as they are administered by PINES/GPLS staff. 
  
-<note>Even if all branches in a system use the same set of shelving locations, you may wish to set them on a per-branch basis rather than at the system level. This will allow you to change the properties of one branch's shelving location independently of the other branches' shelving locations. For example, if one branch is undergoing renovations but is not entirely closed to the public, certain shelving locations may be marked not-holdable temporarily.</note>+<note>Even if all branches in a system use the same set of shelving locations, you may wish to set them on a per-branch basis rather than at the system level. This will allow you to change the properties of one branch's shelving location independently of the other branches' shelving locations. For example, if one branch is undergoing renovations but is not entirely closed to the public, certain shelving locations may be marked non-holdable temporarily.</note>
  
 ===== Setting Up and Editing Shelving Locations ===== ===== Setting Up and Editing Shelving Locations =====
Line 11: Line 11:
 Existing Shelving Locations for the selected location appear in the lower part of the screen. The focus location can be changed via the "Focus Location" dropdown menu. Shelving Locations may be edited or deleted from this section. Existing Shelving Locations for the selected location appear in the lower part of the screen. The focus location can be changed via the "Focus Location" dropdown menu. Shelving Locations may be edited or deleted from this section.
  
-The top interface allows you to create a new copy location and has the following fields: +The top interface allows you to create a new shelving location and has the following fields: 
-  * Name – the text name for the Copy Location, which is visible in the OPAC (for OPAC visible copy locations) +  * Name – the text name for the Shelving Location, which is visible in the OPAC (for OPAC visible shelving locations). 
-  * OPAC Visible – this sets whether items in this Copy Location may be found in the OPAC by patron searches. +  * OPAC Visible – this sets whether items in this Shelving Location may be found in the OPAC by patron searches. 
-  * Hold Verify – this setting is not used in PINES and its purpose is currently unknown. Please select "No" for this field. *oldable – this sets whether the items in this Copy Location are eligible for patron hold requests. +  * Hold Verify – this setting is not used in PINES and its purpose is currently unknown. Please select "No" for this field.  
-  * Circulate – this sets whether the items in this Copy Location circulate.+  Holdable – this sets whether the items in this Shelving Location are eligible for patron hold requests. 
 +  * Circulate – this sets whether the items in this Shelving Location can circulate.
   * Owning Library – allows you to set the owning library or system.   * Owning Library – allows you to set the owning library or system.
  
Line 21: Line 22:
 holdability, and circulatability. If a Shelving Location setting is set to "No," item-level settings are holdability, and circulatability. If a Shelving Location setting is set to "No," item-level settings are
 overridden. overridden.
 +
 +<note tip>Any "No" will override a "Yes." So, if an item is set to non-holdable, but the shelving location is set to holdable, the item will not be holdable. Or, if an item is set to holdable, but the shelving location is set to non-holdable, the item will not be holdable.</note>
admin/settings/shelving-locations.1553802011.txt.gz · Last modified: 2019/03/28 19:40 by tmccanna