User Tools

Site Tools


admin:workstations:scanners

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
admin:workstations:scanners [2019/09/16 20:01] – [Compatible Barcode Scanners] tmccannaadmin:workstations:scanners [2024/01/02 17:04] (current) – [Compatible Barcode Scanners] tmccanna
Line 14: Line 14:
  
    * **ADESO Model 12004** \\ //Library note: Required some configuration troubleshooting to get it to work with phone screens, but it did work.//    * **ADESO Model 12004** \\ //Library note: Required some configuration troubleshooting to get it to work with phone screens, but it did work.//
-   * **Bayscan Imaging 2D Drivers License Scanner** \\ //Note: When orderingyou can have them pre-programmed to work with the PINES patron registration form.//+   * **Bayscan Imaging 2D Drivers License Scanner** \\ //Note: This will also scan library cards and item barcodesnot just licenses. Contact Dave Shaffer ([[mailto:dshaffer@bayscan.com]]) to order and request that they be pre-programmed to work with the PINES patron registration form.//
    * **Datalogic Gryphon GD4130-BK**    * **Datalogic Gryphon GD4130-BK**
 +   * **Datalogic Gryphon GD4132** \\ //Library note: It took a bit of work to get it configured properly. Instructions available at [[https://cdn.datalogic.com/Download?iddwnfile=9809]] //
    * **Honeywell Hyperion 1300G**    * **Honeywell Hyperion 1300G**
    * **Honeywell/Metrologic 1300G-2 USB** \\ //Library note: So far they have been great scanners and work for every device. \\ Library note: ////We are loving the Honeywell 1300G-2USB models. They have a trigger, but you can program them to auto-scan. You can also change the volume of the beep they make – high, medium, low or OFF! They scan barcodes from smartphones very well. \\ Library note: The stands are not included, we had to order those separately.// \\ [[https://www.honeywellaidc.com/products/barcode-scanners/industrial/hyperion-1300g|Manual]]    * **Honeywell/Metrologic 1300G-2 USB** \\ //Library note: So far they have been great scanners and work for every device. \\ Library note: ////We are loving the Honeywell 1300G-2USB models. They have a trigger, but you can program them to auto-scan. You can also change the volume of the beep they make – high, medium, low or OFF! They scan barcodes from smartphones very well. \\ Library note: The stands are not included, we had to order those separately.// \\ [[https://www.honeywellaidc.com/products/barcode-scanners/industrial/hyperion-1300g|Manual]]
   * **Honeywell/Metrologic Voyager 1400G**   * **Honeywell/Metrologic Voyager 1400G**
   * **Honeywell/Metrologic Voyager 1400G-2D** \\ //Library note: Staff have reported that they like these better than our normal scanners even for regular barcodes.//   * **Honeywell/Metrologic Voyager 1400G-2D** \\ //Library note: Staff have reported that they like these better than our normal scanners even for regular barcodes.//
-  * **Honeywell 1400GPDF USB** \\ //Library note: It requires a certain distance (4-5 inchesto scan correctly) and runs slightly slower than some other scanners. //+  * **Honeywell 1400GPDF USB** \\ //Library note: It requires a certain distance (4-5 inches to scan correctly) and runs slightly slower than some other scanners. // 
 +  * **Honeywell 1470g** \\ //Library note: Staff report that this scanner will scan older, yellowed/low-contrast barcodes better than some of the other scanners. //
   * **QuickScan Imager Black, KBW, USB, WAND, RS232 Scanner with USB cable (90A052044)**   * **QuickScan Imager Black, KBW, USB, WAND, RS232 Scanner with USB cable (90A052044)**
   * **Unitech MS250** \\ //Library note: Trigger-type scanner that requires the scanner to be touching the smartphone prior to the trigger being pressed. They only cost around $40.//   * **Unitech MS250** \\ //Library note: Trigger-type scanner that requires the scanner to be touching the smartphone prior to the trigger being pressed. They only cost around $40.//
Line 46: Line 48:
 **Metrologic Barcode Scanner Issues** **Metrologic Barcode Scanner Issues**
  
-If your scanner is inserting a b in front of the barcode and trailing a d, then you will need to restore your scanner to its default properties.+If your scanner is inserting a 'bin front of the barcode and trailing a 'd,then you will need to restore your scanner to its default properties.
  
-[[http://evergreen-ils.org/dokuwiki/doku.php?id=evergreen-user:metrologic_ms951_default_scanner_pages|Click here for Instructions]]+[[http://evergreen-ils.org/dokuwiki/doku.php?id=evergreen-user:metrologic_ms951_default_scanner_pages|Click here for instructions]]
  
  
Line 57: Line 59:
 One example is the Barcode & QR Code Keyboard developed by Nikola Antonov (available for Android through the Google Play store). Once it is installed, follow the instructions to authorize it to run on your device. To switch back and forth between different virtual keyboards, you can do so in your device's settings, or you should be able to click in a field to display the keyboard and then pull down your notifications bar at the top to see a "Select keyboard" message that will allow you to switch. One example is the Barcode & QR Code Keyboard developed by Nikola Antonov (available for Android through the Google Play store). Once it is installed, follow the instructions to authorize it to run on your device. To switch back and forth between different virtual keyboards, you can do so in your device's settings, or you should be able to click in a field to display the keyboard and then pull down your notifications bar at the top to see a "Select keyboard" message that will allow you to switch.
  
-Once the virtual keyboard is installed, you can click in any field on a web site to pull up the keyboard, then click on the barcode icon. This will launch the scanner - once it recognizes the item's barcode, it will enter the number into the field that you originally clicked on.+Once the virtual keyboard is installed, you can click in any field on a website to pull up the keyboard, then click on the barcode icon. This will launch the scanner - once it recognizes the item's barcode, it will enter the number into the field that you originally clicked on.
  
  
admin/workstations/scanners.1568664086.txt.gz · Last modified: 2019/09/16 20:01 by tmccanna